垫片的安装 1 ) Apply lubricant uniformly to all thread, nut and washer load-bearing surface -- 将润滑剂均匀地涂于螺母、垫圈,承压的各表面等 2 ) Never use any compound to stick the gasket to the flange --请勿使用任何复合物将垫片粘接在法兰盘上 3 ) Always torque with proper tools --用合适的工具来安装 4 ) Torque bolts in a cross bolt tightening pattern --正确扭紧螺栓 5 ) Never retorque elastomer based gasket after exposition to elevated emperatures --垫片在一定的温度工作后请勿二度扭紧螺栓 6 ) Always use the bolts specified in the standard -- 用标准中*的螺栓 7 ) Use all the bolts of identical material -- 采用的螺栓材质应一样 8 ) Never reuse bolts -- 请勿使用用过的螺栓 9 ) Always use washers -- 常用垫圈 10 ) Install the thinnest possible gasket -- 尽可能使用薄一些的垫片 11 ) Never cut the gasket against the flange -- 请勿在法兰上切割垫片 12 ) Store the sheets horizontally in a cool and dry place. Avoid direct sunlight -- 储存在阴凉、干燥之处平放, 远离阳光直射